Radio

Electro Voice RE320 vs RE20 vs RE27 N/D Comparison (Versus Series)

RE320

Price: $300
Freq Resp: 45Hz - 18kHz
Polar Ptrn: Cardioid
Sensitivity: ~ -52dB
Impedance: 150-Ohms

RE20

Price: $450
Freq Resp: 45Hz - 18kHz
Polar Ptrn: Cardioid
Sensitivity: ~ -56.5dB
Impedance: 150-Ohms

RE27 N/D

Price: $500
Freq Resp: 45Hz - 20kHz
Polar Ptrn: Cardioid
Sensitivity: ~ -52dB
Impedance: 150-Ohms

Today we're comparing three of the most popular microphones for podcasting, radio broadcasting, and let's play gamers; the Electro Voice RE320, RE20, and RE27 N/D.

The build quality of all of these microphones is nearly identical. They have the same chassis for the most part, with minor cosmetic differences. There are vents that run the length of the body that allow for the variable D technology to decrease the proximity effect. They all have a steel body and a good amount of weight to them. The RE320 & RE20 have a single high pass (low cut) switch, while the RE27 N/D has 3 switches, (2) high pass switches, and (1) high cut switch.

The frequency response of these mics vary pretty significantly. The RE320 has a minor bass boost of 1dB between 150 & 250 Hz, and then has a relatively flat mids section. There is a significant 5dB presence and treble boost from 3.5kHz to 10kHz. It flattens between 13-15kHz and then cuts the remainder of the air. The RE20 has the flattest response, remaining consistant between 70Hz and 400Hz with multiple 1-2dB cuts between 400Hz and 5kHz which is followed by a 1-2dB boost from 5kHz - 12kHz at which point it gradually rolls off the air frequencies. The RE27 N/D has a flat bass and mid section with a significant boost beginning at 1kHz peaking at 5dB around 4kHz. And then begins to roll off at 8kHz gradually all the way up to 20kHz.   

When it comes to the overall performance of these microphones, they are very different. The RE320 is a very bright microphone with a significant presence and treble boost. This allows your voice to really stick out and pop, but to me it sounds top heavy. It did sound the best on the electric guitar and acoustic guitar out of all three mics.

The RE20 had the most neutral sound with minor cuts and boosts throughout the frequency response. The minor cuts to the mids does make it sound on the verge of being scooped, but it's not terrible. Out of all of the mics in this comparison, it sounded the best for singing and spoken word.

The RE27 N/D was the most jarring of the 3 microphones. It's natural boost was very unflattering on voice, so much so that I had to run it with the high cut enabled. Due to the boost starting at 1kHz, it tended to have a honkier tone. Additionally, the off axis coloration was the least flattering on this microphone.

RE320 Freq Resp

RE320 Freq Resp

RE20 Freq Resp

RE20 Freq Resp

RE28 Freq Resp

RE28 Freq Resp

With all that analysis, the WINNER of this versus series is the Electro Voice RE20. I chose this microphone in lieu of it's flaws. Those being it has the quietest output of all the microphones in this comparison, and the minor cuts in the mids make it sound on the verge of sounding scooped. The main reason I did pick it though is due to the it having the flattest and most neutral tone. However, this is a tone that I personally prefer for spoken word and singing, so this may not be for everyone.

If you have any questions, or want to provide your input, please leave a comment on the youtube video.

Buy the Electro Voice RE-320
US: http://amzn.to/2hmCSup 
UK: N/A
CA: N/A
DE: http://amzn.to/2fEkFbE

Buy the Electro Voice RE-20
US: http://amzn.to/2AIXoC2 
UK: http://amzn.to/2yv4KTC 
CA: http://amzn.to/2AI2XR3 
DE: http://amzn.to/2jW1xb7

Buy the Electro Voice RE27 ND
US: https://amzn.to/2lQoZaz 
UK: N/A
CA: N/A
DE: https://amzn.to/2MHkqdN

Buy the Focusrite Scarlett 2i2 (2nd Gen) 
US: http://amzn.to/2vDFbzK 
UK: http://amzn.to/2w8O2f6 
CA: http://amzn.to/2wKGKfG 
DE: http://amzn.to/2wVYnfL

 

Electro Voice RE27 N/D Broadcast Dynamic Mic Review

Today I have finally completed the Electro Voice expansion of Pokemon: Mic Edition. We're looking at the last mic in their RE-series of mics, which just so happens to be the most expensive of the three; the RE27 N/D.

For this review, I have the mic connected directly to the Focusrite Scarlett 2i2 2nd gen, with the gain set at 12:30. I have done no post processing on the audio, it is all raw, but the audio was slightly boosted in final cut pro X to simply make the audio easier to listen to.

If you are interested in this microphone, it will set you back $150.00 on Amazon

What's In the Box

  1. Hardshell Storage Box

  2. Microphone

  3. Microphone Mount (Includes: 5/8" & 3/8" adapter)

  4. Documentation

Specifications

  1. Frequency Response: 45Hz - 20kHz

  2. Polar Pattern: Cardioid

  3. Sensitivity: ~-52dB

  4. Impedance: 150-ohms

Performance / Features

The build quality of this mic is on par with all of EV's other mics that I've tested; excellent. It has a steel body and a nice metal mesh grill. Along the side there are vents that allow for the Variable D technology that helps keep the proximity effect in check. It weighs in at 1 pound 9 oz, so it is a pretty heavy microphone as well. Near the bottom of the mic it has 3 switches that cut portions of the frequency response. 1st is a 6dB cut at 250Hz, 2nd is a 12dB cut at 1000Hz, and 3rd is a 3dB cut of the presence and treble boost. Lastly there is an XLR port on the back of the microphone.

The frequency response is listed as 45Hz - 20kHz. In the neutral mode this microphone has a relatively flat frequency response from 1khz and below, but above that there is a drastic boost that peaks at +7dB above the mids. There are two peaks at 4kHz and 6kHz and then it rolls off the remainder of the treble and air after that. I found the only really usable setting for spoken word was to enable the high cut, and leave the other switches alone. 

The overall performance of this mic was a bit of a shock initially. When I pulled it out of the box a month ago and plugged it in, I almost sent it right back. With the neutral settings it is very harsh, shrill, and forward in the higher frequency range. Once I enabled the high cut though the tone become MUCH better and actually enjoyable to listen to. It also does a great job at off axis rejection and rear rejection, but it should be noted that the off axis coloration is very honky, and terrible sounding.

Pros

  • Slightly higher output than other dynamics due to Neodymium magnet

  • Handles processing well

  • Great job at off axis and rear rejection

  • Great build quality

Cons

  • In neutral mode, the mic sounds bad

  • The low cuts are a bit too drastic

  • Off axis coloration is bad

freq.png
polar.png

Conclusion

For electric guitar, acoustic guitar, and singing I did not enjoy this microphone much at all. It simply is not a tone that I would look to use in those applications. For spoke word however, I found it rather enjoyable when you have the high cut enabled and get relatively close to the microphone. If you're looking for a bright & smooth microphone for podcasting and radio broadcasting, I think this will be a great option, but just make sure to cut those highs and use proper microphone technique.

If you have any additional questions about this microphone, leave them on the youtube video, and I will try to reply ASAP. 

Buy the Electro Voice RE27 ND
US: https://amzn.to/2lQoZaz
UK: N/A
CA: N/A
DE: https://amzn.to/2MHkqdN

Buy the Focusrite Scarlett 2i2 (2nd Gen)
US: http://amzn.to/2vDFbzK 
UK: http://amzn.to/2w8O2f6 
CA: http://amzn.to/2wKGKfG 
DE: http://amzn.to/2hbtxsV