Boom

Neewer Mic Suspension Boom Arm Review

This is an off day review because this doesn't count. I am talking about the Neewer Microphone Suspension Boom Arm

What's In the Box 

  1. Desk Mount
  2. Microphone Boom Arm
  3. Microphone Clip
  4. 5/8" to 3/8" Microphone Stand Adapter

Performance / Features

The build on this thing is pretty decent. It's an all metal stand and a metal mount. The mic clip that is provided is somewhat cheap feeling, and the mic stand adapter is not of the highest quality. 

I have two main issues with this boom arm.

(1) the springs on the boom arm tend to cause a bit of noise. If the microphone you have mounted to this arm is not on a shock mount, and you bump the desk or springs on the stand, you will hear it all in your recording. It tends to sound like a hum in the background (it almost sounds like 60 cycle hum).

The solution to this issue would be to utilize a shock mount. A practice I would recommend even with a higher end boom arm.

(2) The joint that the microphone clips on to is attached via pressure. It is placed between two pieces of metal that are squeezed together to hold it in place. This is not the sturdiest option. If you have a heavy mic and have this joint point downwards, there's a chance that this joint will break and your microphone will fall. This happened to me and I was not able to fix the joint. 

The solution to this problem is to keep this joint always pointed up so gravity cannot become your worst enemy. (if this second issue is confusing, I demonstrate it in the video).

Pros

  • SUPER CHEAP
  • Decent Build Quality

Cons

  • Springs cause noise
  • Microphone joint is poorly designed

Conclusion

This is a $15 microphone boom arm that gets the job done. I would absolutely recommend it. Just make sure you're aware of both of the issues that I pointed out, and you'll be fine. I would also recommend staying away from the boom arm that has the microphone cable built into it. The issue I see with that version of the boom arm is, if the mic cable goes bad, you're going to have to cut the mic cable and pull it out of the stand. You're better off just buying the solo boom arm and purchasing a separate cable.  

If you have any additional questions about this headset, leave them in the comments on this site or on the youtube channel, and I will try to reply ASAP. 

Buy it on Amazon: http://amzn.to/1O083U2